0.3-3X1650 mm Dilme hattı

Technical Specifications 

Suitable material: DX51, DC01, HRP 

Tensile strength: 550Mpa 

Yield strength: 480Mpa 

Material width: 400~1,650mm 

Material thickness: 0.3-3.0mm 

Coil I.D. : Φ508mm 

Φ610mm (with extra rubber sleeve) 

Coil O.D. : 800mm ~ 2,100mm 

Oily: Dry surface 

Coil weight: 20 Ton max 

Recoil I.D.: Φ508mm or 610mm (with extra steel sleeve) 

Recoil O.D. : 800mm ~ 2,100mm 

Recoil weight: Max 20T 

Strip width: Min. 30mm, Max. 1,650mm 

Trimming width: Single side 2~15 mm 

Line speed: Max 200m/Min 

Threading speed: Max 0-20m/min 

Slitting capacity: 30 strips x 1.0 mm x 580Mpa x 200 m/min 

12 strips x 2.0 mm x 580Mpa x 120 m/min 

6 strips x 3.0 mm x 580Mpa x 90 m/min 

Width tolerance: ≤±0.05mm(thickness≤2.0mm, width≤100mm) 

≤±0.1mm (thickness>1.0mm, width>100mm) 

Burr tolerance: less than 3% of the thickness, but ≤ 0.03 mm 

Camber accuracy: Max 0.35 mm/m 

Recoiling interlayers: ≤±1 mm (uniform speed, except the first 5 laps) 

Coil turriform: ≤2.0 mm (uniform speed, except the first 5 laps) 

Material requirements: No wave edges, no bowness, straight material 

Except the first 5 laps, all the material capable with the above requirements, we guarantee the tolerance 

Slitting method: Driven slitting